In nearly all cases, most individuals spend quite a bit of money purchasing their lift truck. Therefore, it is really important to take good care of it so as to protect your investment well into the long run. It is a good idea to know the procedures that are carried out during taking care of and maintaining this machinery.
Amongst the best ways to tell how good the engine is performing is by starting the lift truck up and listening carefully to see how it runs. For instance, if there are any misses or knocks, the machinery is defective and this should raise several issues. Additionally listen closely for any squealing sounds that come from the belts as these noises will provide you with a wealth of information.
When performing maintenance, some of the main parts you will have to pay attention to comprise the horn, safety warning devices, the overhead guard, the lights and the gauges. Any burnt out light bulbs or faulty components must be replaced as soon as they are noticed. It is also imperative to check the wiring.
After the above parts have been inspected thoroughly, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Every cell of the battery should be inspected so as to make sure that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machinery and then change the filters. The hydraulic filter, the transmission filter and the fuel filters must be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
Once the oil change has been done and new filters have been fitted, visually inspect the drive axle from underneath the machine. Be certain to grease the axle if there is any grease fitting. Check the belts on the engine for any frays or cracks. If you find any, fix the issue accordingly. After that, check every other component of the equipment including the wheels. If any kind of concern or fault is detected, be sure to deal with it immediately in order to make certain the machinery is running at its safest and optimum levels.